No. Canaletto is not a manufacturer of lighting fixtures.
We supply technical profiles, systems, and accessories for integrating LED strips into drywall construction systems. The selection and installation of LED strips and drivers/power supplies are handled by the electrician on site.

The Canaletto idea was born from experience in design and construction: years of development dedicated to creating profiles and systems to integrate light into sheetrock and drywall constructions, with clean finishes and replicable results. The range has evolved thanks to the work of our Technical Sales Director, a former craftsman and business owner, who has transformed recurring critical issues into practical solutions.

• Aligns the suspended drywall ceiling on wall with uneven plaster, improving the perimeter fit
• Gives the suspended drywall ceiling a high aesthetic quality, with cleaner and more linear details
• Allows the installation of LED strips, integrating them into the system
• Ensures the elasticity of the suspended drywall ceiling-wall joint, attenuating structural loads for a more stable joint over time
• Provides thermal and acoustic insulation, supporting environmental comfort
• It is easy to install, reducing complexity and unexpected problems

Because it is designed as a construction system, not as a simple profile.

Canaletto makes it possible to achieve a professional, high-quality result with a simpler and more predictable installation: controlled perimeter details, clean finishes, and fewer unexpected issues on site.

Canaletto systems improve coordination between design and installation, reducing rework and post-installation disputes once the project is completed.

The junction between the suspended drywall ceiling and the wall is one of the most delicate points of all, both in modular and drywall systems. Even when the work is carried out by experienced craftsmen, variables typical of manual work and construction sites come into play: plaster that is not perfectly flat, uneven walls, differences in paintwork (especially with dark walls), and micro-movements between different structures.

In suspended drywall ceiling, the perimeter of the wall can be visually unattractive precisely because the “wavy” plaster creates a crack or an uneven joint that is immediately noticeable and detracts from the aesthetics of the room.

In sheetrock, on the other hand, the most frequent imperfections concern:

• an open corner between the wall and the suspended drywall ceiling that is not perfectly straight, often highlighted by color contrasts (darker walls);
• the perimeter skirting board, which, when made using traditional techniques, tends to “follow” the irregularities of the wall;
• small detachments or micro-cracks in the plaster in the area adjacent to the joint.

Integrate Canaletto serves precisely to manage this critical point: it introduces a perimeter profile that helps to correct and perfect the fit to the wall and to decouple the movements between the two structures, making the detail cleaner, more stable, and replicable.

The main advantages are more predictable installation times, cleaner finishes, and more controlled architectural detail. Compared to a traditional solution (perimeter guide with reinforcements and more complex joint compound), Canaletto systems simplify some critical steps and help reduce errors, corrections, and rework—with a more replicable result in sheetrock and drywall systems.

Canaletto can be made of mineral composite, aluminum, and sheetrock, used individually or in combination depending on the line and application. We therefore choose the most suitable combination of materials to achieve clean integration in finishes, precision in detail, and ease of installation in drywall systems.

Because each material meets different drywall requirements and, when combined, allows for a more controlled and replicable result. The selection is the result of development and technical testing, including physical and mechanical tests.

In summary:

• Mineral composite: stability and quality of finish in architectural detail
• Sheetrock: continuity with the drywall system and natural integration into the workmanship
• Aluminum: high dissipation, resistance, and reliability in technical areas

The final combination is defined according to the application (direct/indirect light, shutters, integrated details) and installation requirements.

Yes. The visible and non-visible surfaces of Canaletto systems can be finished and painted after proper preparation, depending on the material and solution chosen. For mineral composite components, Canaletto already applies a single-component water-based white primer during production, designed to facilitate subsequent finishing on site. In sheetrock applications, the normal skimming and finishing steps for drywall systems are followed, while for aluminum elements, painting is possible with suitable cycles or finishes prepared according to the project.

The materials used in Canaletto systems (mineral composite, sheetrock and aluminum, also in combination) have been selected and validated to ensure stability and reliability over time. The performance and behavior of the components remain constant even when typical operating conditions vary, thanks to technical tests and application experience on site.

Yes. Canaletto systems are designed to allow reliable fixing of construction elements in the designated points (metal framework, accessories, and finishing components), including using self-tapping screws, with quick and practical application for the installer. The choice of materials (mineral composite, sheetrock and aluminum, also in combination) and the configuration of the system have been validated with technical checks and laboratory tests to ensure the strength and hold of the fastening in conditions typical of drywall systems.

In a suspended drywall ceiling, for example, the assembly and alignment of the metal frame (such as perimeter and uprights) require precise and repeatable fastenings: Canaletto is designed to make these operations more convenient, reducing uncertainties and installation times.

Resistance tests carried out in the laboratory have shown that the use of the Canaletto mounting kit is essential to achieve maximum system reliability in terms of grip and elasticity, as well as ensuring correct positioning on the wall. The kit was created to standardize the most critical steps of installation and make the result more precise and repeatable.

The mounting kit includes dedicated accessories, including:

• Squares for positioning Canaletto perfectly square to the wall;
• Junction plates to facilitate continuity and alignment of the profile;
• Calibrated screws, designed not to damage the visible part and to correctly fix the profile to the metal frame (even on typical thicknesses such as 1/40”);
• Universal anchors, suitable for fixing on both solid and hollow substrates.

The kit contains everything needed to install an entire package of the relevant Canaletto product, simplifying logistics for retailers and installers and reducing waste and the need for additional materials on site.

The standard length of Canaletto profiles is 6’ 6 3/4”. Standard fixing involves positioning the first bracket approximately 1 9/16″ – 1 15/16″ from the end and continuing with the next ones at a center distance of approximately 15 3/4”: on 6’ 6 3/4”, this normally corresponds to 6 brackets per profile, so that the last one is approximately 1 9/16″ – 1 15/16″ from the other end.

If, on the other hand, you keep 5 squares on 6’ 6 3/4”, in order to comply with the 1 9/16″ – 1 15/16″ at the ends, the average center distance becomes approximately 18 11/16″ – 18 7/8″.

Yes. Canaletto helps to align the joint between the suspended drywall ceiling and the wall even in the presence of uneven plaster or small irregularities. By adjusting the screw on the dowel inserted into the bracket, it is possible to precisely adjust the fit to the wall and achieve a more linear and clean result. The adjustment must be made during alignment, before the finishing stages.

Mineral composite Canaletto profiles (when not combined with aluminum) feature millimeter-precise lateral milling. This process offers two advantages:

• it provides a precise reference for fixing the U-shaped perimeter profile;
• it creates a bed of filler between Canaletto and sheetroc, facilitating the application of micro-perforated paper and the finishing of the joint.

In configurations with aluminum, this milling is not required because the aluminum component is designed to always allow easy attachment to the sheetrock, maintaining continuity and cleanliness of detail during installation.

The joint between Canaletto and sheetrock is treated using the same technique as for normal shhetrock panel joints, following the correct preparation and finishing steps.

Many installers use mesh for convenience and speed of installation; however, based on tests carried out, micro-perforated paper has demonstrated better resistance to higher stresses, making it preferable when maximum joint reliability is required.

Different brands of filler can be used, provided that it is a setting, sticky, low-shrinkage filler. The leading manufacturers of sheetrock offer high-quality fillers suitable for this type of work.

Canaletto was created as a standardized system: lines, components, and installation methods are designed to make the work more coordinated between designers, planners, installers, and retailers, with a more replicable and controlled result on site.

At the same time, Canaletto also supports customization: depending on the project, it is possible to develop tailor-made solutions (specific shapes, details, and additions) while maintaining technical and aesthetic consistency with the system.